Vinyl Installation with Written Instruction

Items Needed:

• Diluted Soap detergent with Water
• Cleaning agent to clear Object's surface from Grease/Dirt/Dust.
• Tape if needed to ensure straight alignment of decals when deploy

Steps

1. Compare Decals with Object's artwork.
2. May need to deploy individual lettering due to difference in spacing.
3. Cut decals in smaller grouping to enable easier deployment.
4. MIght need Tape to ensure Lettering Alignments are straight.
5. Clean object's surface to rid dust/dirt/oil.
6. Remove Decals from base with Transfer Tape.
7. Apply soap water to both products and decals base to enable shifting of decals to desire Postioning/alignments
8. Slide Decals to object instead of direct Paste to avoid unwanted air bubble trap.
9. After aligments are done, use finger to GENTLY push out airbubble and exccessive soap water.
10. Use hairdryer to blow from a distance to dry decals. Push decal if bubble appear.
11. Avoid too hot temperature or too long duration which will result in damaging Object's paintwork.
12. After decal set in, Inspect clear of air bubbles. Then leave it to heal for 2 hours.